AEG ARCTIS Operating Instructions Manual - Page 11

Browse online or download pdf Operating Instructions Manual for Refrigerator AEG ARCTIS. AEG ARCTIS 34 pages. Built-in fridge-freezers
Also for AEG ARCTIS: Operating Instructions Manual (32 pages), Operating Instructions Manual (28 pages), Operating Instructions Manual (40 pages), Operating Instructions Manual (28 pages), Operating Instruction (16 pages), Operating Instructions Manual (36 pages), Operating Instructions Manual (36 pages), Operating Instructions Manual (26 pages), Operating Instructions & Installation Manual (28 pages), Operating Instructions Manual (36 pages), Operating Instructions Manual (27 pages), User Manual (24 pages), Installation Instructions Manual (11 pages), Operating Instructions Manual (29 pages), Operating Instructions Manual (23 pages), Installation Instructions Manual (25 pages), Installation Instructions Manual (24 pages)

AEG ARCTIS Operating Instructions Manual

The freezer needs ventilation

Air is fed under the door through the
vent slots in the base and is exhausted
upwards along the back wall. To ensure
proper air circulation never cover or
alter the vent openings.
Important! If the appliance is installed
under, for example, a hanging cabinet, a
clearance of at least 10 cm between the
top of the appliance and the cabinet
above it must be maintained.
Please check whether, after installing
your appliance and especially after
reversing the door, the door seal fits
tightly. A badly fitting door seal may lead to heavy frosting and a
higher power consumption (see also "Something not working").
Remove the two wall spacers from
the appliance accessories pack and,
in accordance with the illustrations,
insert them into the retainers located
at the top of the rear of the appli-
ance so that the distance from the
wall required for the necessary venti-
lation is ensured.

Appliance Alignment

0
1. The appliance must be level. Please compensate for unevenness in the
floor by turning the two adjustable feet at the front.
When two appliances are placed beside each other, the spacers
enclosed in the plastic wrapping should be glued between the appli-
ances as shown in the illustration.
818 36 10-01/6
Installation
109