Brother HE-120PKG Manual - Page 11

Browse online or download pdf Manual for Software Brother HE-120PKG. Brother HE-120PKG 42 pages. Accessory catalog

Print Page

Brother

Embellishment

Feet

Braiding Foot

Clear-view Foot

Baby Blanket, Pillow & Bib

created by June Mellinger

Braiding Foot

Attaches up to 3/16 inch (5 mm) wide braids, ribbons, tapes, cords, etc.

1. Loosen the screw on the presser foot and insert a braid through the guide before

attaching the presser foot on the machine.

2. Slide the plate of the guide back and forth to fit the width of the braid.

3. Tighten the screw and pull the braid behind the presser foot.

4. Attach the presser foot onto the machine.

5. Set the zigzag width slightly wider than the width of the braid.

6. Stitch braid in place.

SA141

All Brother home-use sewing machines

Clear-view Foot

Use this presser foot where visibility of seams or pattern markings are

desired. Perfect for quilting appliqué!

1. Attach the presser foot and select a stitch from satin or decorative stitches.

2. Line up the center guide mark on the presser foot over the desired seams or pattern markings.

3. Sew.

SA145

SA144

ABCDEFGHJKLMNO

Cording Foot (5-hole)

Cording Foot (7-hole)

Cording Foot

Used for embellishing 1 to 3 cords or

decorative threads. Perfect for couching!

1. Slip a cord from the right of the presser foot, and place

each cord into each guide (to use single cord, use the

center guide).

2. Place cord under the presser foot, and select zigzag

stitch with maximum stitch width.

Cording Foot (5-hole)

Used for embellishing 1 to 5 cords or

decorative threads. It can be used with

brother sewing machines of 7 mm feed width.

1. Insert cords or threads into each hole on the presser foot.

2. Attach the presser foot and pull cords under the presser foot.

3. Line up the cords, and select zigzag stitch with maximum

stitch width.

Cording Foot (7-hole)

Used for embellishing 1 to 7 cords or decorative threads.

It can be used with brother sewing machines of 7 mm feed width.

1. Insert cords or threads into each hole on the presser foot.

2. Attach the presser foot and pull cords under the presser foot.

3. Line up the cords, and select zigzag stitch with maximum stitch width.

SA158

ABCDEFJKMN

Brother

Embellishment

Feet

Cording Foot

SA110

SA148

ABCDEFJKMN

GHILOP

SA157

ABCDEFJKMN