AEG ERT1374 Operating Instructions Manual - Page 9

Browse online or download pdf Operating Instructions Manual for Refrigerator AEG ERT1374. AEG ERT1374 26 pages. Integrating refrigerators

Print Page

Your refrigerator needs ventilation

Integratable models (i-appliances)

The integrated door of the furniture

cabinet largely seals the installation

recess. i-appliances must therefore be

provided with ventilation by having an

opening in the furniture plinth. The

warmed air must be able to be

exhausted upwards through the air

shaft on the furniture back. The venti-

lation cross-sections should be at least

200 cm

Warning - In order not to impair the

function of the appliance, never cover or obstruct the ventilation

openings.

See installation instructions supplied.

Please check whether, after installing your appliance and especially

after rehingeing the door, the door seal seals right round. An untight

door seal may lead to heavy frosting and thereby to a higher power

consumption (see also „What to do if...").

1. Before initial start-up, refer to the appliance rating plate to ascertain if

supply voltage and current values correspond with those of the mains

at the installation location.

e.g.:

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply.

The supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electri-

cal installation must include suitable means of isolating the appliance

from the mains (e.g. fuse, cut-out, current trip or similar with a mini-

mum contact separation of 3 mm).

Attention: The mains connection cable may only be replaced by a

skilled electrician. Please contact your dealer or our customer service

department for repairs.

AC 220 ... 240 V 50 Hz or

220 ... 240 V~50 Hz

Installation