Brother ImageCenter ADS-2000 Product Safety Manual - Page 6

Browse online or download pdf Product Safety Manual for Software Brother ImageCenter ADS-2000. Brother ImageCenter ADS-2000 20 pages. High-speed desktop document scanner
Also for Brother ImageCenter ADS-2000: Specification Sheet (2 pages), Manual (16 pages), Quick Setup Manual (12 pages), Technical Specifications (2 pages), Product Safety Manual (18 pages)

Brother ImageCenter ADS-2000 Product Safety Manual
DO NOT continue using the machine if it has been dropped or the cabinet has been damaged.
Instead, unplug the machine from the power outlet and contact Brother Authorized Service
Personnel.
If water, other liquids, or metal objects get inside the machine, immediately unplug the machine
from the AC power outlet and contact Brother Authorized Service Personnel.
This machine should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. Doing this might cause an
electrical shock. If you are not sure what kind of power source you have, contact a qualified
electrician.
Power Cord Safety:
• This machine is equipped with a 3-wire grounded plug. This plug will only fit into a grounded
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call
your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded
plug.
• Use only the power cord supplied with this product.
• DO NOT allow anything to rest on the power cord.
• DO NOT place this machine where people can walk on the cord.
• DO NOT place this machine in a position where the cord is stretched or strain is otherwise
put on the cord, as it may become worn or frayed.
• Brother strongly recommends that you DO NOT use any type of extension cord.
FIRE HAZARDS
Failure to follow the warnings in this section may create the risk of a fire.
DO NOT use flammable substances, any type of spray or an organic solvent/liquid that contains
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a risk
of fire or electrical shock.
6