AEG OKO SANTO SANTO Operating Instructions Manual - Page 24

Browse online or download pdf Operating Instructions Manual for Refrigerator AEG OKO SANTO SANTO. AEG OKO SANTO SANTO 28 pages. Built-in refrigerators

Print Page

What to do if ...

Malfunction

Heavy build up of frost,

possibly also on the door

seal.

The compressor does not

start immediately after

changing the temperature

setting.

Water on the floor or on

storage shelves.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light

bulb, switch off the appliance and unplug it, or pull the fuse or the cir-

cuit breaker.

Light bulb data: 220-240 V, max. 15 W, fitting: E 14

1. To switch off the appliance,

turn the temperature regula-

tor to position "0".

2. Unplug the mains plug.

3. To change the light bulb,

undo the cross head screw

and remove the light bulb

cover.

4. Change the defective light

bulb.

5. Refit the light bulb cover and the cross head screw.

Possible Cause

Door seal is not air tight

(possibly after changing

over the hinges).

This is normal, no error has

occurred.

Water drain hole is

blocked.

Remedy

Carefully warm the leak-

ing sections of the door

seal with a hair dryer (not

hotter than approx. 50 °C).

At the same time shape the

warmed door seal by hand

such that it sits correctly.

The compressor starts after

a period of time.

See the "Cleaning and

Maintenance" section.