Fujitsu fi-5530C - Document Scanner Getting Started - Page 16

Browse online or download pdf Getting Started for Printer Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 28 pages. Color departmental scanner
Also for Fujitsu fi-5530C - Document Scanner: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Getting Started (28 pages), Brochure & Specs (2 pages), Specifications (2 pages), Consumable Replacement And Cleaning Instructions (14 pages), Cleaning Instructions Manual (13 pages), Instruction Manual (10 pages)

Print Page

Fujitsu fi-5530C - Document Scanner Getting Started

6. Set scanning resolution, document size, etc. on

the [TWAIN driver] window (for setting details

of scanning) and click the [Scan] button.

For details on [TWAIN driver], refer to the

HINT

"FUJITSU TWAIN32 Scanner Driver Help"

provided on the Setup CD-ROM

7. Documents are scanned, and the generated

images are displayed on the [ScandAll 21] win-

dow.

If the scanning is completed without any troubles, the

installation was performed successfully.

For details on various types of scanning, refer to the

"fi-5530C Operator's Guide" on the Setup CD-ROM.

For FUJITSU ISIS Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Take out the Setup CD-ROM from its pack-

age, but do not insert the Setup CD-ROM

into the CD driver yet.

• Connect the scanner correctly to your PC.

For details on how to connect the scanner,

HINT

refer to "2.2 Connecting the Scanner to

Your PC" on page 3.

■ Installing the FUJITSU ISIS

Scanner Driver

Windows XP screenshots are used in this

HINT

section as examples. The windows and

operations may vary slightly depending on

your OS.

1. Press the power button to turn ON the scanner.

2. Turn on your PC and log on to Windows..

When using Windows NT 4.0, Windows

ATTENTION

2000 or Windows XP, log on as a user with

"Administrator" privileges.

3. If the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click [Cancel] to close the Wizard win-

dow.

4. Insert the "Setup CD-ROM" into the CD drive.

⇒

appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your CD drive is off.

In this case, run "Install.exe" in this CD-

ROM directly from "Explorer" or "My Com-

puter".