Fujitsu FI-6230 Getting Started - Page 13

Browse online or download pdf Getting Started for Printer Fujitsu FI-6230. Fujitsu FI-6230 23 pages. Color duplex workgroup scanners
Also for Fujitsu FI-6230: Getting Started Manual (20 pages), Brochure & Specs (2 pages), Instruction Manual (10 pages), Cleaning And Maintenance (47 pages)

Print Page

■ Installing the FUJITSU ISIS

Scanner Driver

Screenshots taken in Windows XP are used as examples.

The displayed windows and operations may slightly vary

depending on the operating system you are using.

Press the Power button to turn on the scanner.

Turn on your computer, and then log on to

Windows.

Be sure to log on as a user with "Administrator" privileges.

When the scanner is automatically detected, [Found

New Hardware Wizard] or [Add/Remove Hardware

Wizard] dialog box appears. Click the [Cancel]

button to close the Wizard dialog box.

Insert the "Setup CD-ROM" into the CD drive.

⇒

<SETUP DISK START UP SCREEN> appears.

This screen may not appear if the "AutoPlay" setting is set to

off. In this case, find "Install.exe" in the CD-ROM using

"Explore" or "My Computer" and execute it.

Click [INSTALL PRODUCTS], and then click [ISIS

Driver].

fi-6140/fi-6240/fi-6130/fi-6230 Image Scanner Getting Started

Error Recovery Guide Installation dialog box

appears.

Error Recovery Guide is an application with which you

can view on-screen information for troubleshooting

errors that may occur in the scanner. This guide helps

solve problems, so select [Yes] to install it. You may

also choose to install it later.

After you select [Yes] for installing Error Recovery Guide,

the [Choose Setup Language] dialog box appears. Select a

language and follow the on-screen instructions. The Error

Recovery Guide dialog box is automatically displayed

when the installation is complete. Wait until the installation

of the ISIS driver starts.

Select a language for the installation on the

[Choose Setup Language] dialog box, and then

click the [Next] button.

Install the driver, following the on-screen

instructions.

When you see the [InstallShield Wiizard Complete]

dialog box, click the [Finish] button.

Your computer will restart and detect the scanner. Do not

remove the Setup CD-ROM from the CD drive until your

computer completely starts up again.

Depending on the operating system you are using, you

may need to do the following.

Windows 2000:

If you see the [Digital Signature not Found] dialog box, click

[Yes].

Windows Vista:

If you see the [Found New Hardware] dialog box, select

[Locate and install driver software], and then in the [User

Account Control] dialog box, click the [Continue] button, if it

is displayed.

The installation of FUJITSU ISIS is complete.

Next, install ScandAll PRO (

To make sure that FUJITSU ISIS is successfully installed,

perform a scan with a ISIS-compliant application such as

ScandAll PRO. For information about how to scan with

ScandAll PRO, refer to section "2.4 Checking Scanner

Driver Operation" on page 10.

page 8).