Brother MFC-8810DW Quick Setup Manual - Page 29

Browse online or download pdf Quick Setup Manual for Software Brother MFC-8810DW. Brother MFC-8810DW 45 pages. Google cloud print guide - english
Also for Brother MFC-8810DW: Manual (30 pages), Manual (36 pages), Network Manual (29 pages), Manual (27 pages), Manual (12 pages), Quick Setup Manual (45 pages), Product Safety Manual (23 pages)

Print Page

1. Wireless Setup

For Wireless Network Users

Temporarily connect the USB cable (not

included) directly to the computer and the

machine.

Do one of the following:



If the Installation confirmation screen

appears, check the box and click Next, go

to h.

Otherwise, go to i.



Check Yes if you want to connect with the listed

SSID. Click Next and go to k.

The wizard will search for wireless networks

available from your machine. Choose the SSID

that you wrote down for your network in step

20-a on page 26, and then click Next.

Note

• If the list is blank, check that the wireless access

point/router has power and is broadcasting the

SSID, and then see if the machine and the

wireless access point/router are within range for

wireless communication. Then, click Refresh.

• If your wireless access point/router is set to not

broadcast the SSID you can manually add it by

clicking the Advanced button. Follow the

on-screen instructions for entering the Name

(SSID), and then click Next.

Enter the Network Key you wrote down in step

20-a on page 26, and then click Next.

Note

If your network is not configured for

Authentication and Encryption, the ATTENTION!

screen will appear. To continue configuration,

click OK.

Confirm the wireless network settings and then

click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Disconnect the USB cable between the

computer and the machine and then click Next.

Wireless setup is now complete. A four

level indicator at the top right of your

machine's LCD will show the wireless

signal strength of your wireless access

point/router.

To install the MFL-Pro Suite, continue to

step 23-e on page 38.

Now go to

page 38