Brother MFC-J430w Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Software Brother MFC-J430w. Brother MFC-J430w 22 pages. Product safety guide - spanish
Also for Brother MFC-J430w: Advanced User's Manual (47 pages), Manual (12 pages), Manual (21 pages), Product Safety Manual (17 pages), Quick Setup Manual (37 pages), Safety Manual (17 pages), Quick Setup Manual (37 pages), User Manual (41 pages), Quick Start Manual (37 pages), User Manual (40 pages), (Spanish) Manual (21 pages), (Spanish) Manual (16 pages)

Print Page

For Wireless Network Users

Setup using the CD-ROM

installer and a USB cable

(Windows

Put the supplied installer CD-ROM into your

CD-ROM drive. Follow the on-screen

instructions.

The CD-ROM Top Menu will appear. Click

Install MFL-Pro Suite and click Yes if you

accept the license agreements. Follow the

on-screen instructions.

Choose Wireless Network Connection, and

then click Next.

When Firewall/AntiVirus detected screen

appears, choose Change the Firewall port

settings to enable network connection and

continue with the installation.

(Recommended) and click Next.

If you are using a firewall other than the

Windows

Firewall see the instructions

provided with your firewall software for

information on how to add the following

network ports.



For network scanning, add UDP port 54925.



For network PC-Fax receiving, add UDP port

54926.

If you still have trouble with your network



connection, add UDP port 137 and 161.

Choose Use your computer or the control

panel directly. and then click Next.

Choose Temporarily use a USB cable

(Recommended) and then click Next.

Note

If the Important Notice appears, check the box

after confirming the SSID and Network Key, then

click Next.

only)

Temporarily connect the USB cable (not

included) directly to the computer and the

machine.

If the confirmation screen appears, check the

box and click Next, go to h.

Otherwise, go to i.

When the following screen appears, check Yes

if you want to connect to the listed SSID. Click

Next and go to k.

When the following screen appears, the wizard

will search for wireless networks available to

your machine. Choose the SSID that you wrote

down for your network in step 16-a on

page 12, and then click Next.

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.