Brother MFC-J4310DW Manual - Page 20

Browse online or download pdf Manual for Software Brother MFC-J4310DW. Brother MFC-J4310DW 22 pages. Air print guide - spanish
Also for Brother MFC-J4310DW: Quick Setup Manual (47 pages), Manual (36 pages), Product Safety Manual (17 pages), Manual (13 pages), Manual (13 pages), Product Safety Manual (20 pages), (Spanish) Guia De Web Connect Manual (38 pages), (Spanish) Manual (24 pages), (Spanish) Guia De Seguridad Del Producto Manual (16 pages), (Spanish) Manual (12 pages), (Spanish) Manual (11 pages)

Print Page

Glossary

If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi

Direct network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct network. The

default setting is Off.

Device Name

You can check the device name of the Brother machine in the Wi-Fi Direct network environment. The device

name will be shown as MFC-xxxx or DCP-xxxx (where xxxx is your model name.).

SSID

This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the

SSID name.

IP Address

This field displays the current IP address of the machine, as assigned by the G/O.

Status

This field displays the current Wi-Fi Direct network status. When your machine is a G/O, it displays the

message G/O Active(**) (where ** is the number of devices). When your machine is a client, the machine

displays the message Client Active. If you see Off, your machine's Wi-Fi Direct interface is disabled.

Signal

This field displays the current Wi-Fi Direct network signal strength.

Channel

This field displays the current Wi-Fi Direct network channel.

Speed

This field displays the current Wi-Fi Direct network speed.

If you want to use the Wi-Fi Direct network connection, set I/F Enable to On.