Brother MFC-J825DW Quick Setup Manual - Page 6

Browse online or download pdf Quick Setup Manual for Software Brother MFC-J825DW. Brother MFC-J825DW 42 pages. Quick setup guide - spanish
Also for Brother MFC-J825DW: Manual (12 pages), Manual (21 pages), Product Safety Manual (17 pages), Web Connect Manual (22 pages), Quick Setup Manual (45 pages), Safety Manual (17 pages), Troubleshooting Manual (6 pages), (Spanish) Manual (21 pages), (Spanish) Manual (16 pages), (Spanish) Guía De Configuración Rápida (44 pages)

Print Page

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a clockwise until it clicks to

release the vacuum seal. Then remove the

orange protective packing a as shown.

IMPORTANT

DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

1 1

Take care to match the colour of the lever a

with the cartridge colour b, as shown in the

diagram below.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until it clicks. After all the ink

cartridges are installed close the ink cartridge

cover.

Note

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.