Brother MFC490CW - Color Inkjet - All-in-One Quick Setup Manual - Page 7
Browse online or download pdf Quick Setup Manual for Software Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 47 pages. Mac network connection
Also for Brother MFC490CW - Color Inkjet - All-in-One: Quick Setup Manual (48 pages), Setup & Installation (5 pages), Connection Manual (6 pages), Repair Instructions (2 pages)
Print Page
6
Check the print quality
a
When the preparation process has finished, the
LCD shows this message
.
Set Paper and Press
Start
Press Colour Start.
b
Check the quality of the four colour blocks
on the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
If you can see missing short lines, press 2 (No)
on the dial pad and go to d.
a
d
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on
the dial pad.
1 1
After pressing 1 (Yes) or 2 (No) for both black
and colour, the LCD shows:
e
Press 1 (Yes), the machine will then start
cleaning the colours.
f
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
OK
Poor
Black OK?
Yes
Press
No
Press
Start Cleaning?
Yes
Press
No
Press
7