Fujitsu S510 - ScanSnap - Document Scanner Getting Started Manual - Page 28

Browse online or download pdf Getting Started Manual for Printer Fujitsu S510 - ScanSnap - Document Scanner. Fujitsu S510 - ScanSnap - Document Scanner 30 pages. Color image scanner
Also for Fujitsu S510 - ScanSnap - Document Scanner: Installation Procedures (3 pages), Specifications (2 pages), Quick Installation Manual (2 pages), Brochure & Specs (2 pages), Getting Started Manual (28 pages), Cleaning Instructions (2 pages)

Print Page
Fujitsu S510 - ScanSnap - Document Scanner Getting Started Manual
5.
Close the ADF.
ADF
You should hear the ADF click when it returns to its
original position.
6.
Turn on the scanner.
ScanSnap Manager icon changes from
7.
Right-click the "ScanSnap Manager" icon
task bar, and select [Check consumable supplies]
from the menu.
8.
In the "Check consumable status" window, click the
[Reset] button of Pad ASSY Count.
The counter is reset to "0".

6.3. Replacing the Pick Roller

Replace the Pick roller following the procedure below.
1.
Remove the document on the Paper chute.
2.
Open the ADF while pulling the Cover open lever.
Paper chute
ADF
Cover open lever
26
3.
Adjust the Side guide to the "A5" size.
4.
Remove the Sheet guide.
Pinch the Pickup tabs on the Sheet guide to pull the
Sheet guide to remove it.
to
.
S
on the
S
5.
Rotate the Pick roller bushing (left side) in the
direction of the arrow.
Pick roller
6.
Remove the Pick roller with its shaft.
Slightly pull up the left part of the Pick roller shaft
(about 5mm), move it towards the left side, and then
raise it to remove from the scanner.
Pick roller shaft
A5
A5
Sheet guide
Pick roller
Pickup tab
Pick roller
bushing
Pick roller
shaft