Fujitsu ScanPartner 620C User Manual - Page 22
Browse online or download pdf User Manual for Printer Fujitsu ScanPartner 620C. Fujitsu ScanPartner 620C 28 pages. Image scanner
Also for Fujitsu ScanPartner 620C: Specifications (2 pages), Consumable Replacement And Cleaning Instructions (7 pages), Installation Procedures (5 pages)
Print Page
Question: Paper skews in the scanner.
Answer:
a) Check the feeding roller condition; do the cleaning if necessary. (See Section
3.1)
b) Use the paper guide when feeding the paper.
Question:
When the scanner is powered-on, it makes noises and will not stand ready.
Answer:
a) Check to make sure the shipping retainer from the scanner is removed.
b) Check to make sure the scanner is placed on a flat desktop surface. Uneven
surfaces may cause the scanner to function improperly.
Question:
When the scanner is powered-on, the lamp does not light.
Answer:
Please check:
a) The lamp is out of order. In that case, contact your authorized local dealer to
change the lamp. The lifetime of the lamp is about 5000 hours.
b) The fuse on the main board of the scanner is burned. Check the main board of
the scanner. If the fuse is burned, put in a new fuse that is 250V/2A.
c) If the fuse burns again after the changing, it means the inverter of the lamp is
burned. Contact your authorized local dealer to replace the inverter.
Question:
When scanning, the scanner or system will often crash.
Answer:
Please check:
a) If the cable is firmly seated;
b) Make sure only two SCSI terminators are connected to your SCSI daisy chain.
One is at the end of the SCSI device; another is already in your host adapter.
4-2