Fujitsu Lifebook T4020 Bios Manual - Page 6
Browse online or download pdf Bios Manual for Tablet Fujitsu Lifebook T4020. Fujitsu Lifebook T4020 30 pages. T series tablet pc
Also for Fujitsu Lifebook T4020: User Manual (24 pages)
L i f e B o o k T S e r i e s T a b l e t P C
Serial ATA Port 0 Submenu of the Main Menu
The Serial ATA Port 0 submenu identifies what Serial
ATA/IDE devices are installed.
Main
Serial ATA Port 0 [FUJITSU MHT2040BH-SATA]
Type:
Total Sectors:
Maximum Capacity:
F1
Help
ESC
Exit
Menu Field
Options
■
Type:
Auto
■
None
LBA Format
Total Sectors:
---
Maximum Capacity:
---
■
A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or
DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk for-
mat CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take drive
C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or DVD-ROM
can never use a C: designation if a formatted internal hard drive is present since the C: designator is always
reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your applica-
tion software will use the new designations.
■
Be careful of the operating environment when booting from CD-ROM?DVD-ROM or you may mistakenly over-
write files.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
[Auto]
LBA Format
78140160
40008MB
Select Item
-/Space
Change Values
Select Menu
Enter
Select
Figure 2. Serial ATA Port 0 Master Submenu
Default
Description
[Auto]
Select Auto to have the type of Serial or Parallel ATA device automatically identified
by the BIOS at POST. If None is selected, the following Set-up items do not appear.
Logical Block Addressing (LBA)
---
The total number of sectors on your hard disk
---
The maximum capacity of your hard disk
6
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit