Brother ADS-2600We Quick Start Manual - Page 15

Browse online or download pdf Quick Start Manual for Scanner Brother ADS-2600We. Brother ADS-2600We 23 pages.
Also for Brother ADS-2600We: Product Safety Manual (17 pages)

Print Page
Brother ADS-2600We Quick Start Manual
For Wireless Network Users (ADS-2600We only)
7
Setup using your Brother
machine
a
Place the Brother machine within range of your
wireless access point/router. The range may
differ depending on your environment. Refer to
the instructions provided with your wireless
access point/router.
b
If your wireless access point/router has the
WPS or AOSS™ symbol as shown below, go
to d. If not, go to c.
c
On the machine's LCD, press
(Settings) > Network > WLAN >
Setup Wizard. Follow the instruction on the
LCD. Then go to g.
d
On the machine's LCD, press
(Settings) > Network > WLAN >
WPS/AOSS.
When Enable WLAN? is displayed, press Yes
to accept.
NOTE
• If you do not start WPS/AOSS from the
machine's LCD soon after pressing the WPS or
AOSS™ button on your wireless access
point/router, the connection may fail.
• If your wireless access point/router supports
WPS and you want to configure your machine
using the PIN (Personal Identification Number)
Method, see Configuration using the PIN
Method of WPS (Wi-Fi Protected Setup) in the
Network User's Guide.
e
When the LCD instructs you to start WPS or
AOSS™, press the WPS or AOSS™ button on
your wireless access point/router (for more
information, see the instructions provided with
your wireless access point/router).
Press OK on your Brother machine's LCD.
f
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses and try to connect to your
wireless network.
g
If your wireless device is connected
successfully, the LCD will display the message
Connected until you press OK.
If the connection failed, the LCD will display an
error code. Make a note of the error code, see
Troubleshooting on page 16, and then correct
the error.
Wireless setup is now complete.
The Wi-Fi light
lights up, indicating that the machine's
Network I/F is set to WLAN.
NOTE
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows
mobile device's application download site.
• To download the User's Guide for the
application you are using (Brother
iPrint&Scan), visit the Brother Solutions Center
at http://support.brother.com and click Manuals
on your model's page.
on the Control Panel
®
Phone) from your
15