Brother DCP-J132W Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Scanner Brother DCP-J132W. Brother DCP-J132W 31 pages. Dcp-j132w
Also for Brother DCP-J132W: User Manual (48 pages), User Manual (44 pages), Faqs (2 pages)

Print Page

Gently put the paper into the paper tray print

side down and top edge first. Check that the

paper is flat in the tray.

IMPORTANT

Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.

Gently adjust the paper width guides to the

paper with both hands. Make sure that the

paper width guides touch the edges of the

paper.

Close the output paper tray cover.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.

Check the print quality

When the preparation process has finished, the

LCD shows this message

Set Paper and

Press Start

Press Colour Start.

Check the quality of the four colour blocks on

the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press a (Yes) to

finish the quality check and go to the next step.

If lines are missing, press b (No) and follow the

steps on the LCD.

Poor