Fujitsu ST6012 - Stylistic Tablet PC Bios Manual - Page 2
Browse online or download pdf Bios Manual for Tablet Fujitsu ST6012 - Stylistic Tablet PC. Fujitsu ST6012 - Stylistic Tablet PC 27 pages. Stylistic st6000 series
Also for Fujitsu ST6012 - Stylistic Tablet PC: Specifications (2 pages), Datasheet (6 pages)
Print Page
S t y l i s t i c S T S e r i e s B I O S
ST Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your Tablet PC. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your Tablet PC.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such
as passwords.
Entering the BIOS Setup Utility
To start BIOS Setup, restart your system and when the
message "Tap, Click, or Enter for System Utilities" is
displayed in the status bar at the bottom of the screen,
tap anywhere on the screen with your tablet pen. Select
"BIOS Setup" from the pop-up menu that appears. You
can also press the [Alt] button (the button closest to the
If you want to...
Select a BIOS Setup menu
from the menu bar
Select a BIOS option
Change the setting of a
selected BIOS option
Access a pop-up menu with
a list all possible settings for
a given BIOS option
2
To move left and right to highlight the menu and display a list of menu options, do one of
the following:
•
Press either side of the lower navigation button (the one that is farthest from the
application buttons)
•
Tap on the menu name in the menu bar
•
Tap on the right or left side of the Select Menu field in the command bar
•
Use the right or left arrow keys on an external keyboard
To highlight an option in the list of items for a given menu, do one of the following:
•
Press either side of the upper navigation button (the one that is closest to the
application buttons)
•
Tap on the setting field for the option
•
Tap on the right or left side of the Select Item field in the Command Bar
•
Use the up and down arrow keys on an external keyboard
To cycle through the list of possible settings, do one of the following:
•
Tap directly on the setting field
•
Tap on the highlighted commands to the right or left of Change Values in the
command bar
•
Use the -, +, and space keys on an external keyboard
•
Press the Display Orientation button (third button from the right)
Tap on the [option], then press the [Ent] application button. Tap on the setting of your
choice to select it. You can also hold the pen barrel button while tapping to bring up the
pop-up menu.
corner of the display), or press [F2] on an external
keyboard to launch BIOS Setup.
The system starts the BIOS Setup Utility and the BIOS
Setup Info menu is displayed.
Options and settings for menus in BIOS Setup are
described in tables appearing later in this chapter.
Navigating through the Setup Utility
Instructions for selecting and changing BIOS options
and navigating BIOS Setup menus appear in the table
below.
Exiting BIOS Setup
Once you have finished making changes in BIOS Setup,
you must exit BIOS Setup and allow the system to boot
to apply your configuration changes. You can exit BIOS
Setup by selecting options in the Exit menu. The Exit
menu includes options that allow you to load default
BIOS settings, load previous settings, discard your
changes, save your changes, and exit BIOS Setup. For
details on Exit menu options, see "Exit Menu – Leaving
the Setup Utility" on page 27.
Do one of these...