Fujitsu Stylistic ST4110 User Manual - Page 5

Browse online or download pdf User Manual for Tablet Fujitsu Stylistic ST4110. Fujitsu Stylistic ST4110 12 pages. Tablet dock with combo dvd/ cd-rw drive for stylistic st4000 series

Print Page

DOCKING YOUR SYSTEM

Microsoft

Windows

uses "plug- and-play" technology

to automatically load the files necessary to operate your

Tablet Dock and any attached devices.

P O I N T

The following instructions assume the Tablet Dock is

positioned in portrait mode, with the Lock Handle on

the right of the dock.

1. Plug the system's AC adapter into a wall outlet, then

into the Tablet Dock's DC Input jack.

2. Set the ST4000 system on the Tablet Dock, with the

system oriented in the same direction as the dock.

(See Figure 3 for location). The connector in the back

of the system should be aligned with the interface

connector on the Tablet Dock.

Figure 3. Docking the system

3. Carefully push the system towards the docking port

until you hear a click. The click indicates that the side

latches are in place. Note that the system is not yet

locked into place until the following step is

performed.

4. Firmly pull the lock handle down as far as it will go.

This engages the back latches and side latches, and

locks the system in place.

5. Your Tablet Dock is now ready for use. You may now

attach devices to it.

P O I N T

The front portion of the base should not be used as a

handle.It is designed to support the system when it is

installed in the Tablet Dock.

T a b l e t D o c k U s e r ' s G u i d e

UNDOCKING YOUR SYSTEM

Use these instructions when you want to remove your

system from the Tablet Dock.

P O I N T

The system can be removed from the Tablet Dock

whether the system is operating or not.

1. If you are running a CD or DVD in the Tablet Dock

drive, be sure to stop the drive before undocking the

ST4000.

2. Press the lock release button on the top of the right

slide (above the lock handle). While holding it down,

pull the lock handle upwards to unlatch the back

latches from the system.

3. Pull the system upwards, away from the platform.

The system is now undocked.