Fujitsu D2610 Short Description - Page 15

Browse online or download pdf Short Description for Motherboard Fujitsu D2610. Fujitsu D2610 37 pages.

Print Page

Procedure

The processor socket ist covered with a protective cap to protect the spring

contacts In a warranty case the mainboard can only be taken back by Fujitsu

Siemens Computers with the protective cap secured!

Please note that, depending on the heat sink used, different heat sink

mounts are required on the mainboard.

► Depending on the conﬁguration variant, you must pull a protective foil off the heat sink

or coat the heat sink with heat conducting paste before ﬁtting it.

► Secure the heat sink - depending on the model - with four screws or push it into the mounts.

A26361-D2610-Z110-1-8N19, edition 1

Brief description of the mainboard

► Remove the heat sink.

► Press down the lever and unhook it.

► Fold up the frame.

► Hold the processor between your thumb

and index ﬁnger and insert it into the socket

(b) so that the marking of the processor is

aligned with the marking on the socket (a).

► Press the lever downward until it is

hooked in again.

► Remove the protective cap and keep it.

English - 3