Fujitsu F2MC-16L Series Application Note - Page 10

Browse online or download pdf Application Note for Motherboard Fujitsu F2MC-16L Series. Fujitsu F2MC-16L Series 23 pages.
Also for Fujitsu F2MC-16L Series: Operation Manual (26 pages)

Print Page

Fujitsu F2MC-16L Series Application Note

2.2 System Configuration

To work with the MB2147-05 some system configurations must be done as:

Note: To avoid any damages to the system, all configurations must be done when the

emulation and target system is switched off from any power supply.

2.2.1 Insert Evaluation Chip

The following pictures show the evaluation chip and the corresponding configuration

switches and jumpers.

To insert the evaluation chip lift the lever beside the socket and insert the chip in the right

position. Pin 1 of the evaluation chip is marked with a golden rectangle. Beside the socket a

black arrow on the metal case of the emulator is marking Pin 1 position of the socket. The

following picture shows the right position of EVA-Chip. After insertion of the chip, the lever

can be removed to its horizontal position, fastening the EVA-Chip in the socket.

Figure2.3.1.1 Configuration Area for the Evaluation Chip

MCU-AN-390077-E-V11

Chapter 2 Hardware Installation

Insertion of Evaluation chip (EVA-Chip)

define clock supply for main clock

define clock supply for sub-clock

connection of C-Pin

- 10 -