Fujitsu MB2146-08-E Setup Manual - Page 15

Browse online or download pdf Setup Manual for Motherboard Fujitsu MB2146-08-E. Fujitsu MB2146-08-E 17 pages. 8-bit microcontroller

Print Page

3 Development Platform Quick Start

Start the debugging system in the following sequence:

Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;

Connect an EV board to BGMA IDC10 socket;

Power on EV board power supply, confirm the LED on the BGMA is orange.

Users can start a debug from a PC software SOFTUNE workbench in the following

sequence. Here take IO_TEST project as example.

Start the SOFTUNE by selecting Programs > SOFTUNE V3 > FFMC-8L Family

SOFTUNE Workbench from Start Menu;

Click Open workspace from File Menu in SOFTUNE;

Select IO_TEST.wsp in Open Space window;

Click Start debug from Debug Menu.

If the entire procedure goes right, a debug will start normally.

EV BOARD MB2146-441-E V1.0

Chapter 3 Development Platform Quick Start

MCU-AN-500092-E-10 – Page 13