Fujitsu MB2146-440-E Setup Manual - Page 17

Browse online or download pdf Setup Manual for Motherboard Fujitsu MB2146-440-E. Fujitsu MB2146-440-E 19 pages. F2mc-8fx family mb95330 series 8-bit microcontroller ev board
Also for Fujitsu MB2146-440-E: Setup Manual (23 pages)

Print Page
Fujitsu MB2146-440-E Setup Manual
4 Development Platform Quick Start

4.1 Tools Setup Sequence

Start the debugging system in the following sequence:
Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is green;
Connect an EV board to BGMA IF socket;
Turn on the EV board, confirm the LED on the BGMA is orange and the power LED on
the EV board is on.

4.2 Open Project and Start Debug

Users can start a debugging from PC software SOFTUNE workbench in the following
sequence.
Start the SOFTUNE by selecting Programs> SOFTUNE V3> FFMC-8L Family
SOFTUNE Workbench from Start menu;
Click Open workspace from File Menu in SOFTUNE;
Select MB95F334 Motor Drive V1.0.prj in Open Space window;
Click Start debug from Debug Menu.
If the entire procedure goes right, a debugging will start normally.
EV BOARD MB2146-440-E V1.4
Chapter 4 Development Platform Quick Start
MCU-AN-500070-E-14 – Page 17