Fujitsu MB91460 SERIES Getting Started - Page 30

Browse online or download pdf Getting Started for Motherboard Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 pages. 32-bit microcontroller
Also for Fujitsu MB91460 SERIES: User Manual (45 pages), Application Note (23 pages), Application Note (26 pages), Application Note (29 pages), Application Note (29 pages)

Print Page

6.4 Entering the code

Now the development of the application can begin, therefore the main-function is already

prepared.

Interrupt definition is done in the file 'vectors.c'.

6.5 Compiling the Project

Because of the usage of the "Template Project", you now can compile this example at this

moment. No other settings have to be done.

There are two ways to build to the whole project data. Either choose Project/Build or click the

button in the circle in the illustration below:

6.6 Enter Debugging Mode

After a successful project built you can enter the debugger mode via three different

interfaces depending on your hardware set up:

•

PC-COM-Port (RS232)

•

LAN Interface

•

USB Port

By double clicking on the correct connection type of the Debug dependency in the Project

window (*.sup-files), your PC will connect to the MB2198-01 Emulator and the Softune

Workbench will enter the Debugging Mode.

After a successful connection, the Softune Workbench will look like this:

MCU-AN-391005-E-V17

Getting Started

Chapter 6 Softune Workbench Getting Started

- 30 -