Fujitsu Power Select D2703-S Short Description - Page 23
Browse online or download pdf Short Description for Motherboard Fujitsu Power Select D2703-S. Fujitsu Power Select D2703-S 25 pages. Power select
Also for Fujitsu Power Select D2703-S: Product Facts (6 pages)
Print Page
Installing/removing or replacing processor (with heat sink)
Installing/removing or replacing
processor (with heat sink)
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.
Technical data
•
D2703-S:
AMD Mobile Turion, AMD Mobile Sempron, max. 35 W in der Bauform S1
•
D2703-A:
AMD Mobile Sempron, max. 9 W in S1 design
Procedure
1
1
► Remove any fan and the heat sink.
► Use a flathead screwdriver. Turn the screw (1) 180° anti-clockwise.
► Remove the processor from the slot (2).
► Insert the new processor in the slot.
► Turn the screw (1) 180° clockwise.
The socket with the processor clicks into place.
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
► Depending on the configuration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fitting it.
Fujitsu Technology Solutions
2
2
1
English - 5
19