Fujitsu SK-91464A-100PMC User Manual - Page 18
Browse online or download pdf User Manual for Motherboard Fujitsu SK-91464A-100PMC. Fujitsu SK-91464A-100PMC 28 pages. Mb91460 series
![Fujitsu SK-91464A-100PMC User Manual](/uploads/products/server2/2466019/2466019.png)
4 Programming the internal Flash
All Flash devices have an internal bootloader for asynchronous as well as synchronous
Flash-programming:
< asynchronous-serial Flash-programming via X5 (UART B)
< synchronous-serial Flash-programming via X17
4.1 Asynchronous Mode
To use the asynchronous Flash programming mode, follow these steps:
1. Install the FME FR Flash programmer.
2. Connect the Starterkit (UART B) to the PC using a 1:1 cable.
3. Start the Flash programmer by double-clicking on the flashprg.exe icon
4. Select appropriate MCU type, COM-Port, baudrate, and the path to your HEX-File
(.mhx)
5. Power-off the board or assert and hold RESET
FMEMCU-UG-910025-15
SK-91464A-100PMC User Guide
Chapter 4 Programming the internal Flash
- 18 -
© Fujitsu Microelectronics Europe GmbH