A-Neu Video HD-44 Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Matrix Switcher A-Neu Video HD-44. A-Neu Video HD-44 18 pages. 4x4 hdmi matrix switcher

Print Page

MORE STUFF



Note: Turning the unit System Power 011 via RS-232 will extinguish the LED channel display leaving only the Power

SW~ LED on. The Video and Audio outputs will also mute. While the unit is turned 011 by RS-232 it will continue to accept and

act upon switching commands. For example, if the unit is in the off mode (via RS-232) and you send a command to switch an

input to an output that route will complete and the video and audio will now appear on that channel only. The front panel LED

channel display for that particular output will also show the input selected (for that single output channel only). The remaining

LED's will remain off and video and audio outputs muted. The unit will still return status and change messages in response to

commands sent while in Power Off state. A hard reset command (SBALLRST) will return the unit to normal operation and also

unlock the front panel.

Power Off mode.

SBSYSMOF

SBSYSMON

Unit will respond with

SBALOFAK

SBALONAK

Example: Put Unit in Standby (Soft Power)

SBSYSMOF

SBALOFAK

FRONT PANEL LOCK



Note: Hard resetting the unit will unlock the Front Panel controls.

SBSYSMLK

SBSYSMUK

Unit will respond with

SBSYSLOK

SBSYSULK

Example: Lock Front Panel Buttons

SBSYSMLK

SBSYSLOK

UNIT RESET

SBALLRST

Unit will respond with

SBRSTACK

Example: Reset all outputs to Input 1

SBALLRST

SBRSTACK

RS-232 SERIAL COMMANDS

- Put system into Standby (Soft Power Off)

- Bring unit out of Standby (Soft Power On)

- Unit is in Standby

- Unit is no longer in Standby

-Send

-Rcvd

- When front panel is locked, changes can only be made by RS-232

- Front Panel Unlock

- Front Panel has been Locked

- Front Panel has been Unlocked

-Send

-Rcvd

- Reset every output to Input 1

- Unit has reset each Output to Input 1

-Send

-Rcvd