Indesit WIXXL 127 Instructions For Use Manual - Page 10
Browse online or download pdf Instructions For Use Manual for Washer Indesit WIXXL 127. Indesit WIXXL 127 36 pages.
Print Page
Care and maintenance
Cutting off the water or electricity
GB
supply
• Turn off the water tap after every wash. This will
limit the wear of your appliance's water system and
also prevent leaks.
• Unplug your appliance when cleaning it and during
all maintenance operations.
Cleaning your appliance
The exterior and rubber parts of your appliance can be
cleaned with a soft cloth soaked in lukewarm soapy
water. Do not use solvents or abrasives.
Cleaning the dispenser drawer and
compartments
It is advisable to clean the dispenser drawer regularly.
! ! ! ! !
Do not try to clean any part of the dispenser drawer
while the machine is running.
4. Relocate the dispenser drawer and push it firmly
back into place.
10
1. Pull out the drawer
until it reaches its stop.
2. Press the drawer
release button to remove
the dispenser drawer
(see figure).
3. Clean and dry the
dispenser drawer,
syphons, grate and
fabric conditioner exit
channel (A).
A
Also regularly clean the
outlet pipe area (B).
B
Caring for your appliance door and
drum
• Always leave the appliance door ajar to prevent
unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-cleaning
pump that does not require any maintenance.
Sometimes, small items (such as coins or buttons)
may fall into the pre-chamber that protects the pump,
situated in the lower part of the same.
!
Make sure the wash cycle has ended and unplug the
appliance.
To access the pre-chamber:
3. clean the interior thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks are
securely in place before you push it onto the
appliance.
Checking the water inlet hose
Check the water inlet hose at least once a year. If you
see any cracks, replace it immediately: during the
wash cycles, water pressure is very strong and a
cracked hose could easily split open.
! ! ! ! !
Never use hoses that have already been used.
1. using a screwdriver,
remove the cover panel
on the lower front of the
washing machine (see
figure);
2. unscrew the lid
rotating it anti-clockwise
(see figure): a little water
may trickle out. This is
perfectly normal;