Indesit XWSB 61251 Instructions For Use Manual - Page 11

Browse online or download pdf Instructions For Use Manual for Washer Indesit XWSB 61251. Indesit XWSB 61251 16 pages.

Personalisation

Turning the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash

N.B.: If the set value is compatible with the selected cycle, the knob indicator will be lit (fixed light). If it isn't, it will flash and 3

beeps will be heard.

The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value

set for each wash cycle.

The various wash functions available with this washing machine will help to achieve the desired results, every time.

To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.

Note:

- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and

the function will not be activated.

- If the selected option is not compatible with another previously selected option, the indicator light will flash accompanied

by a buzzer (3 beeps), and only the latter option will be activated; the indicator light corresponding to the activated option will

turn on.

Sport

This option allows for selecting the most suitable programme for any type of sports clothing, and is designed to remove dirt

while optimally preserving the technical features of the garments. The various Sport option levels offer the following wash

cycles:

Sport Shoes, a cycle designed to safely wash up to 2 pairs of sports shoes (fabric) simultaneously.

Gym Kit, a cycle designed to simultaneously wash any type of sports clothing together with gym towels (temp 40°).

Technical Wear, designed for specifically washing waterproof garments or clothing with special technical fibres like

Gore-Tex, so as to optimise washing performance while preserving their technical properties over time. Do not use fabric

softeners for garments with technical fibres.

Fast Forward

During a wash programme and under certain conditions, pressing this button allows for ending the wash programme after

only 20' if necessary, by performing a brief rinse cycle followed by a spin cycle at maximum 800 rpm or lower, if reduced

manually during the programme customisation phase. In this case, washing and rinsing performance will be reduced. After

pressing the button, the relative indicator light turns on together with the indicator light of the rinse phase. If the selected

temperature is equal to 40° and/or the button is pressed during the initial phase of the programme, the "Fast Forward" option

lasts longer so that the detergent can dissolve properly and avoid damaging the fabrics. In this case, the rinse phase indica-

tor light flashes while the wash indicator light remains fixed until the necessary activation conditions are fulfilled. If less than

20' remain of the wash programme, the option will be disabled.

Easy iron

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end

of the cycle the washing machine will perform slow rotations of the drum, while the EASY IRON and START/PAUSE indicator

lights will flash and the END led will remain lit in a fixed manner. To end the cycle, press the START/PAUSE button or the

EASY IRON button.

Press this button to reduce the spin speed.