Indesit BIAA 1x F xx WD Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Refrigerator Indesit BIAA 1x F xx WD. Indesit BIAA 1x F xx WD 12 pages. 2-door fridge
Also for Indesit BIAA 1x F xx WD: Operating Instructions Manual (12 pages), Operating Instructions Manual (8 pages)

Print Page

Indesit BIAA 1x F xx WD Operating Instructions Manual

1. Description of the Appliance

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of

the appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator

by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical

socket ensure the following:

• The appliance is earthed and the plug is compliant with the

law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on

the bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-

240V).

• The socket is compatible with the plug of the appliance. If

the socket is incompatible with the plug, ask an authorised

technician to replace it (see Assistance). Do not use

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (see Installation).

! Before connecting the appliance, clean the compartments

and accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal

light illuminates.

2. Turn the TEMPERATURE ADJUSTMENT knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment

automatically adjusts itself according to the position of the

TEMPERATURE ADJUSTMENT knob.

1 = warmest

We recommend, however, a medium position.

The cooling section of the refrigerator is located inside the

back wall of the refrigerator compartment for increased space

and improved aesthetics. During operation, the back wall will

be covered in frost or water droplets depending on whether

the compressor is operating or paused. Do not worry, the

refrigerator is functioning normally.

If the TEMPERATURE ADJUSTMENT knob has been set

on high values with large quantities of food and with a high

ambient temperature, the appliance can operate continuously,

resulting in excessive frost formation and excessive energy

consumption: compensate for this by shifting the knob towards

lower values (defrosting will occur automatically). In static

appliances, the air circulates in a natural way: the colder air

tends to move downwards as it is heavier. The food should be

stored as follows:

If ambient temperature is less than +15°C You can activate

switch in the light box to have correct temperature in both

compartments till ambient tempera-

ture will be higher than +15°C. Note:

Energy Consumption will be increa-

sed.

If You can see condensate on the top

of fridge compartment You can acti-

vate the same switch till condensate

will be excluded.

Note: Energy Consumption will be

increased.

PURE WIND *

It is recognizable due to the presence of the mechanism on the

top part of the refrigerator compartment (see diagram).

Pure Wind maximises air circulation, improving the efficiency of

the evaporator and helping to achieve the optimal temperature

inside the refrigerator as quickly as possible each time it has

Varies by number and/or position, available only on certain

models.

5 = coldest