Indesit 882/9661 Daily Reference Manual - Page 4

Browse online or download pdf Daily Reference Manual for Dishwasher Indesit 882/9661. Indesit 882/9661 8 pages.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

and beeps will sound. The option will not be enabled.

PUSH & GO

Push&Go button is an easily distinguishable button that allows

you direct access to the Push&Go program, a wash and dry cycle

that ensures great cleaning performance in a short time. You

don't have to worry which program to choose, Push&Go cycle

will do the work for you.

To select Push&Go program, switch on appliance, press only

Push&Go button for 3 seconds and close the door within

4 seconds.

DELAY

The start time of the program may be delayed for a period of

time between 1 and 12 hours.

1. Press the DELAY button: the corresponding symbol appears

on the display; each time you press the button, the time

(1h, 2h, etc. up to max. 12h) from the start of the selected

wash cycle will be increased.

2. Select the wash program, press the START/PAUSE button

and within 4 seconds close the door: the timer will begin

counting down.

3. Once this time has elapsed, the indicator light switches off

and the wash cycle begins.

To adjust the delay time and select a shorter period of time,

press the DELAY button. To cancel it, press the button repeatedly

until the selected delayed start indicator light switches off.

The DELAY function cannot be set once a wash cycle has

been started.

MULTIZONE

If there are not many dishes to be washed, a half loading may

be used in order to save water, electricity and detergent.

Select the program and then press the MULTIZONE button:

the indicator over the button lights up and the symbol of the

chosen rack will appear on the display. By default the appliance

washes dishes in all racks.

To wash only the specific rack, press this button repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (only cutlery rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only, and to

reduce the amount of detergent accordingly.

If upper rack is removed, please apply detergent directly

to tub instead of detergent dispenser.

OPERATION INDICATOR

A LED light projected on the floor indicates that the dishwasher is

working. One of the following operating modes can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few seconds,

stays off during the cycle and flashes at the end of the cycle.

c) The light stays on during the cycle and flashes at the end of

the cycle (default mode).

If the delayed start was set, the light goes on either for the first

few seconds or the entire duration of the countdown, based on

whether mode b) or c) was set.

The light goes off every time the door is opened. To select the

mode you prefer, switch on the machine, hold down button

P until one of the three letters appears on the display, press

button P until you reach the desired letter (or mode), hold down

button P to confirm the selection.

Note: If Auto Door is active and it opens the door, then

Operation Indicator will not flash at the end of cycle.

TABLET (Tab)

This setting allows you to optimize the performance of the

program according to the type of detergent used.

Press the TABLET button (the indicator light will light up) if

you use combined detergents in tablet form (rinse aid, salt

and detergent in 1 dose).

If you use powder or liquid detergent, this option should

be off.

EXTRA

EXTRA makes it possible to carry out a heavy-duty wash cycle

of large crockery up to a max height of 53cm: baking pans,

oven grids, dripping pans, hob grids, large saucepans, serving

dishes, pizza dishes, stainless-steel hood filters.

Remove the upper rack to load bulky crockery.

Release the two locks (right and left)

and pull out the rack.

When the upper rack is fitted, the

locks must be always closed.

In order for the water to reach the

crockery everywhere, arrange it as

shown in the Figure.

Do not start the dishwasher without

the upper rack using wash cycles

other than EXTRA.

To carry out the wash cycle Extra

pour the detergent DIRECTLY INTO

THE TUB and not into the dispenser.

Auto Door

Auto Door is a convection drying system which automatically

opens the door during/after drying phase to ensure exceptio-

nal drying performance every day. Door opens at the tempe-

rature that is safe to your kitchen furniture.

As additional steam protection, special designed protection foil

is added together with the dishwasher. To see how to mount

protection foil please refer to (INSTALLATION GUIDE).

Auto Door functionality could be disabled by the user as

follows:

1. Go to the Dishwasher software menu pressing and hol-

ding P button (6 sec).

2. You are currently in Light Control Menu (please refer to

OPERATION INDICATOR description), if you don't want to

change anything please press and hold P button (until one

of the two letters appears on the display).

3. You switched to Auto Door Control Menu, you could

change status of Auto Door functionality by pressing P

button:

E – enabled

d – disabled

To confirm the change and exit from the Control Menu please

press and hold P button (3 sec).