Indesit D 63 User Manual - Page 5

Browse online or download pdf User Manual for Dishwasher Indesit D 63. Indesit D 63 12 pages.

Print Page

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove the

larger food particles to prevent the filter from becoming

clogged, which results in reduced performance.

If the pots and pans have baked-on food that is extremely

hard to remove, we recommend that they be allowed to

soak before they are washed. This will eliminate the need

for extra wash cycles.

Pull out the racks to facilitate loading the dishwasher.

How to Use the Lower Rack

We recommend that you place the most difficult to clean

items on the bottom rack: pots, pans, lids, serving dishes

and bowls, as shown in the figure to the right.

It is preferable to place serving dishes and lids on the

sides of the racks in order to avoid blocking the rotation

of the top spray arm.

- Pots, serving bowls, etc. must always be placed top

down.

- Deep pots should be slanted to allow the water to flow

out.

-The silverware basket can be doubled (see figure A) so

that only one section may be used when the silverware

load is light. This also makes space for additional pots

and pans, and it can also be placed in the upper rack.

- Silverware should be placed in the silverware basket

with the handles at the bottom; If the rack has side

baskets, the spoons should be loaded individually into

the appropriate slots. Especially long utensils should be

placed in the horizontal position at the front of the upper

rack.

How to Use the Upper Rack

The upper rack is designed to hold more delicate and

lighter dishware, such as glasses, coffee and tea cups

and saucers, as well as plates, small bowls and shallow

pans (as long as they are not too dirty).

- Position the dishes and cookware so that they do not

get moved by the spray of water.

How to adjust the Upper rack ...

The top rack can be adjusted using the two rack heights

(top and bottom). To adjust the rack, open up the tabs

that lock the guides and pull out the rack. Arrange the

rack with the back wheels in either the top or bottom

position and then insert it along the guides until the front

wheels are on as well. Close the tabs to lock the rack in

place (see Fig. F).

Lower Rack

Load for 12 Standard Settings (For IEC- EN 50242: upper

rack at top position)

Lower Rack

Normal Daily Load

fig. A

Fig. F

Upper Rack