Indesit IDL 505 Installation And Use Manual - Page 7

Browse online or download pdf Installation And Use Manual for Dishwasher Indesit IDL 505. Indesit IDL 505 17 pages. Indesit dishwasher installation and use
Also for Indesit IDL 505: Installation And Use Manual (17 pages)

Print Page

Loading the Dishwasher

Load examples

Before placing the dishes in the dishwasher, remove the

larger food particles to prevent the filter from becoming

Top Rack

Bottom Rack

clogged, which results in reduced performance.

If the pots and pans have baked-on food that is extremely

hard to remove, we recommend that they be allowed to

soak before they are washed. This will eliminate the need

for extra wash cycles.

Pull out the racks to facilitate loading the dishwasher.

How to Use the Lower Rack

We recommend that you place the most difficult to clean

items on the bottom rack: pots, pans, lids, serving dishes

and bowls, as shown in the figure to the right.

It is preferable to place serving dishes and lids on the sides

of the racks in order to avoid blocking the rotation of the

top spray arm.

- Pots, serving bowls, etc. must always be placed top

down.

- Deep pots should be slanted to allow the water to flow

out.

- Silverware should be placed in the silverware basket.

Knives and utensils with sharp blades or tips should be

positioned with the sharp parts at the bottom.

- If the rack has side baskets, the spoons should be

loaded individually into the appropriate slots.

- Especially long utensils should be placed in the horizon-

tal position at the front of the upper rack.

How to Use the Upper Rack

The upper rack is designed to hold more delicate and

lighter dishware, such as glasses, coffee and tea cups

and saucers, as well as plates, small bowls and shallow

pans (as long as they are not too dirty).

- Position the dishes and cookware so that they do not

get moved by the spray of water.

How to adjust the Upper rack ...

The top rack can be adjusted using the two rack heights

(top and bottom). To adjust the rack, open up the tabs

that lock the guides and pull out the rack. Arrange the

rack with the back wheels in either the top or bottom

position and then insert it along the guides until the front

wheels are on as well. Close the tabs to lock the rack in

place (see Fig. F).

Fig. F