Indesit HOTPOINT LUCE DX1032CX Service Manual - Page 33
Browse online or download pdf Service Manual for Oven Indesit HOTPOINT LUCE DX1032CX. Indesit HOTPOINT LUCE DX1032CX 39 pages. Built-in touch control electronic multifunction 60 cm double oven
Print Page
Indesit
Company
15) Main Oven Circulaire Oven Element
1.
Remove the oven furniture.
2.
Remove the main oven inner rear panel (4 screws).
3.
Remove the element retaining screw on the rear panel.
4.
Remove the 3 screws from the element retaining clips.
5.
Disengage the element from the element retaining bracket.
6.
Pull the element forward and draw the wires through into the oven cavity ensuring that they do
not slip back into the rear panel void. It may be necessary to remove the rear panel as in 8 if the
wires fall back.
7.
Reassemble in reverse order.
16) Top & Main Doors
1.
Open the door fully (Fig. 7) and pull over the locking mechanism from the locked horizontal
position to unlocked vertical position.
2.
Close the door slightly until a resistance is felt and withdraw the hinges out of their supports,
Fig. 8.
3.
Grip the door on the two external sides and pull it up and out to disengage the hinges from the
hinge supports.
4.
Upon reassembly locate the hinges into their supports in the oven front frame (Fig. 8), then open
the door fully to its horizontal position.
5.
Pull the hinge locking mechanism into the locked horizontal position.
6.
If the door will not lay flat the door hinges have not slotted into position correctly.
Fig. 7
Service Manual UK
33 of 39
Fig. 8
English