2N APS MINI ENTRYCOM User And Service Manual - Page 3

Browse online or download pdf User And Service Manual for Control Unit 2N APS MINI ENTRYCOM. 2N APS MINI ENTRYCOM 10 pages.

Print Page
2N APS MINI ENTRYCOM User And Service Manual
Introduction
Dear customer, congratulation on your purchase of the 2N APS mini EntryCom set. It is
our wish that you are fully satisfied with this product for a long time. Because it is a
product, which is being constantly improved, any comments and proposals leading to a
better product are very welcome.

Module characteristics

Reading module for identification of chip cards 2N APS mini EntryCom set is designed
for simple applications of access management and recording attendance using chip cards.
It consists of a mother board and a reading antenna, which serves for non-contact reading of
chip cards codes. It is designed to be installed into the door communicator 2N EntryCom
and therefore it enables adding the function of chip card reader to the door communicator.
Brief description of the system
System APS mini is designed for management of access and recording of attendance in
objects with up to 748 users. Identification of persons is provided by non-contact chip
cards and key rings. Its basic features include: low price, easy installation, high reliability
and minimum service and maintenance requirements.
The basic functions of the system, managing access and programming access rights, are
carried out by the reading module autonomously – without the need to be connected to the
PC. After connecting to the PC the system offers more functions – thanks to online status
monitoring and to archiving of events from the connected reading modules.
The reading module integrating all circuits necessary for one reading place and one door
is the basic hardware element of the APS mini access system.
Regimes of operation
Autonomous ... programming of the database of access rights is carried out via
programming cards ("adding" and "deleting").
Offline ... programming of the database of access rights is carried out via PC. It is also
possible to configure operational parameters of the reading module.
Online ... PC constantly communicates with the reading module or system of reading
modules (up to 32 modules) and stores all events in the system's archive.
Reading module ATEUS
accessories to the module include 2 programming cards for adding and removing user
cards without the need to connect the reading module to the PC (autonomous regime).
Software for operating the reading module via the PC in offline and online regimes can be
downloaded free of charge from the producer's website www.2n.cz. Communication with
the reading modules via the PC requires installation of communication converter
RS485/PC to the communication line (converter RS485/RS232, RS485/USB or
RS485/Ethernet).
®
- APS mini can be used in all regimes of operation. Standard
3