Indesit I6GG1FX/I Operating Instructions Manual - Page 22

Browse online or download pdf Operating Instructions Manual for Cookers Indesit I6GG1FX/I. Indesit I6GG1FX/I 48 pages.

Print Page

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a complete ring showing

the strength of the flame for the relevant burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an anticlockwise

direction so that it is pointing to the maximum flame

setting .

3. Adjust the intensity of the flame to the desired level by

turning the BURNER knob in an anticlockwise direction.

This may be the minimum setting , the maximum setting

 or any position in between the two.

If the appliance is fitted with an electronic lighting

device* (see fi gure), press the ignition button, marked

holding the knob down for a longer period of time.

! If the flame is accidentally extinguished, switch off the

burner and wait for at least 1 minute before attempting

to relight it.

If the appliance is equipped with a flame failure

safety device*, press and hold the BURNER knob for

approximately 2-3 seconds to keep the flame alight and

to activate the device.

To switch the burner off, turn the knob until it reaches the

•.

stop position

Practical advice on using the burners

For the burners to work in the most efficient way possible

and to save on the amount of gas consumed, it is

recommended that only pans that have a lid and a flat

base are used. They should also be suited to the size of

the burner.

Flame adjustment according to levels

The burner flame intensity can be adjusted with the knob

according to 6 power levels, from maximum to minimum

with 4 intermediate positions:



with the symbol

, then hold

the BURNER knob down and turn

it in an anticlockwise direction,

towards the maximum flame

setting, until the burner is lit.The

burner may be extinguished

when the knob is released. If

this occurs, repeat the operation,

a click will indicate the change from one level to another

when turning the knob. The system guarantees a more

precise adjustment, allows to replicate the flame intensity

and to identify easily the preferred level for different

cooking operations.

To identify the type of burner, please refer to the diagrams

contained in the "Burner and nozzle specifications".

Burner

Rapid (R)

Semi-Rapid (S)

Auxilliary (A)

Ultrarapid (UR)

! On the models supplied with a reducer shelf, remember

that this should be used only for the auxiliary burner when

you use casserole dishes with a diameter under 12 cm.

WARNING! The glass lid can break in if it

is heated up. Turn off all the burners and

the electric plates before closing the lid.

*Applies to the models with glass cover

only.

Using the oven

! The first time you use your

appliance, heat the empty oven

with its door closed at its maximum

temperature for at least half an

hour. Ensure that the room is

well ventilated before switching

the oven off and opening the

oven door. The appliance may

emit a slightly unpleasant odour caused by protective

substances used during the manufacturing process

burning away.

! Never put objects directly on the bottom of the oven; this

will avoid the enamel coating being damaged.

Lighting the oven

To light the oven burner, bring a flame or gas lighter close

to opening F (see fi gure) and press the OVEN control

knob while turning it in an anticlockwise direction until it

reaches the MAX position.

Only available in certain models.

Cookware diameter (cm)

24 - 26

16 - 20

10 - 14

24 - 26