Indesit KDP60G Operating Instructions Manual - Page 20

Browse online or download pdf Operating Instructions Manual for Cookers Indesit KDP60G. Indesit KDP60G 24 pages. Free standing gas cooker
Also for Indesit KDP60G: Instructions For Installation And Use Manual (32 pages), Operating Instructions Manual (24 pages)

Indesit KDP60G Operating Instructions Manual
Installation
STABILITY CHAIN
GB
A hole in the gas inlet valve bracket can be used to
engage a stability chain.
CONNECTING TO GAS SUPPLY
Connection to the cooker should be made with an
approved appliance flexible connection to BS 669. A
length of 0.9 to 1.25m is recommended. The length
of hose chosen should be such that when the cooker
is in situ, the hose does not touch the floor.
Those cookers converted to use on LPG should be
connected with a hose suitable for LPG and capable
of withstanding a pressure of 50 mbar.
An adaptor backplate should be fitted within the
shaded area shown, to allow the cooker to be
pushed fully to the wall and to ensure that the
flexible hose is only likely to come into contact with
areas at the rear of the cooker that do not exceed a
temperature rise of 70°C.
20
INSTALLATION AND OPERATIONAL CHECKS
After installation, check for gas soundness. The
supply pressure can be checked at the front left
hotplate burner injector.
Fit the hotplate burner bodies and caps, pan
supports and shelf shield(s).
Referring to the instructions for use where
necessary,
1. Check that the hotplate burners ignite and cross-
light to all ports. Check for a steady flame on the
low setting.
2. Check that the grill burner ignites and cross-lights
to all ports and that the flames remain when the
control is released 3 seconds later, Check for a
steady flame on the low setting.
3. Check that with the main oven set to mark 9, the
burner ignites and that tha flames remain when the
control is released 3 seconds later. Leave the oven
full on with the door closed for 10 minutes, and
check that when the control is turned to mark 1 that
the flame reduces.
4. Check that with the top oven set to mark 8, the
burner ignites and that the flames remain when the
control is released 3 seconds later. Leave the oven
full on with the door closed for 10 minutes, and
check that when the control is turned to mark 1 that
the flame reduces.
5. Check the operation of the timer and oven light.
Instruct the user on operation of the cooker.
On those models adjusted for use with LPG, it is
normal for the oven and grill burners to burn with
yellow tips.