Indesit BIWDIL7125 User Manual - Page 13

Browse online or download pdf User Manual for Washer/Dryer Indesit BIWDIL7125. Indesit BIWDIL7125 15 pages.
Also for Indesit BIWDIL7125: Quick Manual (4 pages)

Print Page

INSTRUCTIONS FOR THE FITTER

Mounting the wooden panel onto the door

and inserting the machine into cabinets:

In the case where the machine must be shipped

for final installation after the wooden panel has

been mounted, we suggest leaving it in its

original packaging. The packaging was designed

to make it possible to mount the wooden panel

onto the machine without removing it

completely (see figures below).

The wooden panel that covers the face of the

machine must not be less than 13 mm in

thickness and can be hinged on either the right

or left. For the sake of practicality when using the

machine, we recommend that the panel be

hinged on the same side as the door for the

machine itself - the left.

Tur sei

Door Mounting Accessories (Fig. 1-2-3-4-5).

N° 2 Hinge Supports

Fig. 1

N° 1 Magnet

Fig. 3

N° 1 Rubber plug

Fig. 5

- No. 6 type A self-threading screws, l =13 mm.

- No. 2 type B metric, countersunk screws, l =25;

for fastening the magnet plate to the cabinet.

- No. 4 type C metric screws, l =15 mm; for

mounting the hinge supports to the cabinet.

- No. 4 type D metric screws, l =7 mm; for

mounting the hinges on the supports.

Mounting the Parts onto the Face of the

Machine.

- Fit the hinge supports to the appliance front

panel, positioning the hole marked with an arrow

in fig. 1 so that it is on the inner side of the front

panel. Fit a spacer (fig. 4/B) between the surfaces

using type C screws.

- Fit the magnet plate at the top of the opposite

side, using type B screws to fix two spacers (fig.

4/B) between the plate and the surface.

N° 2 Hinges

Fig. 2

N° 1 Magnet plate

Fig. 4

N° 4 Spacers

Fig. 4/B