Indesit RI 261 X Instructions For Use Manual - Page 4

Browse online or download pdf Instructions For Use Manual for Hob Indesit RI 261 X. Indesit RI 261 X 8 pages.

Print Page

BEFORE USING THE GLASS CERAMIC HOB

• To make the most of your new appliance, please read the user

instructions carefully and keep them handy for future consultation.

INSTALLATION

Cooktop

• The cooktop must be set into a worktop between 20 mm and 50 mm

deep

• There must be nothing between the cooktop and the oven (cross

rails, brackets, etc.).

• The distance between the lower face of the glass ceramic hob and the

cupboard or separating panel must be at least 20 mm.

• If the cooktop is to be installed next to a column unit, leave a distance

of at least 100 mm from the edge of the cooktop to the side of the

column unit.

• Make an opening in the worktop, respecting the dimensions indicated in

the enclosed product description sheet.

• Apply the supplied gasket to the cooktop (unless it has already been fitted),

after having cleaned its surface.

Important

In order to prevent the electronic circuits from overheating, and therefore from

being damaged, we recommend the following:

• Do not install the cooktop near a dishwasher or washing machine,

so that the electronic circuits do not come into contact with steam

or moisture, which could damage them.

If an oven (from our range of ovens) is installed beneath the cooktop, make

sure that it is equipped with a cooling system.If the temperature of the

electronic circuits exceeds the maximum permitted temperature, the cooktop

will switch off automatically; in this case, wait for a few minutes until the internal

temperature of the electronic circuits reaches a tolerable level, at which point

it will be possible to switch the hob on again.

• Switch the hob off after use.

Rear wall

Front

min. 20 mm

min. 5 mm