Indesit IDC 85 S Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Dryer Indesit IDC 85 S. Indesit IDC 85 S 16 pages. Indesit idc 85 tumble dryer instruction booklet
Also for Indesit IDC 85 S: Instruction Manual (16 pages), Instruction Booklet (4 pages), Instruction Manual (11 pages), Instruction Manual (12 pages)

Print Page

Installation

Where to install the tumble dryer

• Install the dryer far from gas

ranges, stoves, radiators or

hobs, as flames may damage it.

If the dryer is installed below

worktop, ensure there are 10

mm between the upper panel of

the dryer and any objects abo-

ve it, and 15 mm between the

sides of the machine and the

walls or furniture units adjacent

to it. This ensures adequate air

circulation.

Ventilation

• The room must be adequately ventilated while the dryer is

running. Make sure that the dryer is installed in a room free

of humidity and with adequate air circulation. The flow of

air around the dryer is essential to allow water to condense

during drying; the dryer will not function properly if it is placed

in an enclosed space or inside a cabinet.

Some condensation may form if the dryer is used in a small

or cold room.

We do not recommend that the dryer is installed in a cupbo-

ard but the dryer must never be installed behind a lockable

door, a sliding door or a door with a hinge on the opposite

side to that of the dryer door.

Water drain

If your dryer is installed next to a drain the water can be

plumbed into this drain. This does away with the need to

empty the water container. If the dryer is stacked onto or

installed next to a washing machine it can share the same

drain. The height of the drain must be less than 3' (1 m)

from the bottom of the dryer.

Remove existing hose from position shown in picture A

and fit a suitable length of hose and connect as shown

in picture B.

Make sure that the hose is not squashed or kinked

when the dryer is in its final location.

Picture A

15 mm

Picture B

Electrical connections

Before plugging the appliance into the socket, check the following:

• Make sure your hands are dry.

• The socket must have an earth connection.

• The socket must be able to withstand the machine's ma-

ximum power output as indicated on the rating plate (see

Description of the tumble dryer).

• The power supply voltage must fall within the values indica-

ted on the data plate (see Description of the tumble dryer).

• The socket must be compatible with the dryer's plug.

Should this not be the case, replace the plug or the socket.

Do not use extension cords.

The dryer must not be installed outdoors, even if the space is

sheltered. It can be very dangerous if exposed to rain or storms.

Once installed, the dryer's electrical wire and plug must be

within reach.

The power cord must not be bent or squashed.

The power cord is supplied fitted with a BS1363 plug and with

a 13 amp BS1362 fuse. If it is necessary to fit a replacement

fuse, it must be a 13 Amp ASTA approved to BS1362 type.

WARNING: The plug must not be used without a fuse cover. If a

replacement fuse holder/cover is required, it must be of the same

colour coding or wording as shown on the base of the plug.

Replacements are available from authorised dealers.

Moulded plug

Changing the plug

The wires in the power cord are coloured in accordance with

the following.

Green and Yellow (Earth)

wire to terminal marked

"E", symbol x, or coloured

green and yellow.

Blue (Neutral) wire to

terminal marked "N" or

coloured black.

If the plug being replaced is a non-rewirable type, then the

cut-off plug must be disposed of safely. DO NOT leave it where

it can be inserted into a socket and create a shock hazard.

The power cord should be checked periodically and replaced

by a cord specially prepared for this dryer and fitted only by

authorized technicians (see Service). New or longer power

cords are supplied at an extra charge by authorized dealers.

The manufacturer denies any responsibility should any of

these rules not be followed.

If in doubt about any of the above consult a qualified

electrician.

Preliminary information

Once the tumble dryer is installed, clean the inside of the

drum before operating it and remove any dirt accumulated

during transportation.

13A ASTA approved fuse

to BS 1362.

GREEN &

YELLOW

13 ampere fuse

BROWN

Brown (live) wire to

teminal marked "L" or

CROSS-BAR

BLUE

coloured red.

CORD GRIP