A-Neuvideo ANI-1201HD Instruction Manual - Page 6
Browse online or download pdf Instruction Manual for Switch A-Neuvideo ANI-1201HD. A-Neuvideo ANI-1201HD 17 pages. 12 input multi format video switcher
with hdbase-t, vga and hdmi outputs
Also for A-Neuvideo ANI-1201HD: Instruction Manual (16 pages)
Print Page
FRONT PANEL
1
2
(1) Power indicator LED. It will display red when the unit is connected to power.
(2) IR receive sensor for IR remote control.
(3) Input Signal source type LED status.
(4) Video signal source type selection buttons. VIDEO source type (HDMI, VGA, Component Composite and or S-Video.)
(5) Signal source channel selection buttons.
(6) Resolution selection buttons. 1024×768, 1280x720p, 1280×800, 1360×768, 1920×1080p.
(7) MIC volume control buttons. "MUTE" for mute MIC volume, "▲" for MIC volume up, "▼" for MIC volume down, loop controlling.
(8) Line volume control buttons. "MUTE" for mute line volume, "▲" for line volume up, "▼" for line volume down, loop controlling.
REAR PANEL
1
10
(1) Two RCA connectors for stereo audio output, one VGA output, one HDMI output with audio embedded, one HDBASE-T for HDMI
extending (works with ANI-TPHDR) included.
(2) Four VGA connectors for VGA inputs.
(3) Four HDMI connectors for HDMI inputs.
(4) Four 3.5mm stereo audio connectors for VGA audio inputs.
(5) One Component video input (Y/Pb/Pr) two composite video inputs and one S-Video input, two sets stereo analog audio input.
(6) One RS232 port for series control, one USB port for fi rmware update.
(7) Two MIC connectors: MIC with pre-amplifi cation, LINE for audio direct input. One TCP/IP port for network control.
(8) Amplifi er with 2x10W@8Ω output.
(9) Connector for POWER.
(10) Grounding connection.
FRONT AND REAR PANEL
3
5
4
2
3
6
5
4
4
7
8
6
8
7
9