AEG ARCTIS Operating Instructions Manual - Page 24

Print Page

Maintenance and Cleaning

Before any maintenance or cleaning work is carried out DISCONNECT

the appliance from the ELECTRICITY supply.

1. Clean the inside and accessories with warm water and bicarbonate of

soda (5 ml to 0.5 litre of water). Rinse and dry thoroughly.

Warning!

• Do not use detergents, abrasive powders, highly perfumed cleaning

products, wax polishes or cleaning products containing bleach or

alcohol.

2. Regularly check the door seals and wipe clean to ensure they are clean

and free from debris.

Important: Do not use cleaning agents for stainless steel or other

aggressive or abrasive cleaning agents. The protective coat of lacquer

on the stainless steel surface can be damaged by these.

The coat of lacquer protects against finger prints and therefore

additional cleaning agents and maintenance products are no longer

required.

Warning!

• Do not use abrasive products

• There are sharp edges on the underside of the product so care should

be taken when cleaning.

1. Wash the outer cabinet with warm soapy water.

Accumulation of dust at the condenser increases energy consumption.

For this reason carefully clean the condenser at the back of the appli-

ance once a year with a soft brush or a vacuum cleaner.

818 35 95-01/9