AEG ARCTIS Operating Instructions Manual - Page 13

Print Page

Reversing the Door

The side at which the door opens can be changed from the right side

(factory adjustment) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the

appliance must not be connected to the mains. Remove plug from the

mains beforehand.

Parts supplied are for door closer

(B2 and C2) with the door

hinged on the left.

Please retain removed parts for

possible later changes to the side

on which the door is hung.

1. Pull base cover forward to

remove.

2. With door closed screw pivot pin

(A) out of the lower door pivot.

3. Lift the door carefully, remove

to the front and place on one

side.

4. Remove slider for the door closer

(B1) from the right lower part of

the door (if necessary using a

sharp screwdriver). Separate the

corresponding supplied slider

(B2) from the connecting piece

and insert it at the bottom left

side of the door.