AEG ARCTIS Operating Instructions Manual - Page 19

Print Page

Clean the appliance and the interior accessories with a cloth and

lukewarm water. Commercially available dish washing detergents may

also be used.

After cleaning wipe with fresh water and rub dry.

Accumulation of dust at the condenser increases energy consumption.

For this reason carefully clean the condenser at the back of the

appliance once a year with a soft brush or a vacuum cleaner.

After everything is dry, switch to FROSTMATIC function. After running

the appliance for two or three hours, it is ready again for storing

frozen food. Once the frozen food has been placed in the freezer,

return the FROSTMATIC button to the off position.

Magnetic door seal

After opening and closing the door of your freezer whilst it is in oper-

ation, you will not immediately be able to open the door again

because a vacuum will have developed inside, keeping the door closed

until the pressures inside and outside the door have equalised. After a

few minutes you can easily reopen the door.

If the freezer compartment is not fully loaded, pack the frozen food all

together on as few storage levels as possible: drawers (1) and (2).

24 hours before the removal lorry is due to leave switch over to

FROSTMATIC function in order to build up a reserve of coldness in the

frozen items.

Make sure the freezer door cannot come open during transport.

Ensure that the freezer is the last item loaded onto the removal lorry,

so that it is the first to be taken off and can be plugged in again at

once.