AEG ARCTIS Operating Instructions Manual - Page 11

Print Page

The freezer needs ventilation

Air is fed under the door through the

vent slots in the base and is exhausted

upwards along the back wall. To ensure

proper air circulation never cover or

alter the vent openings.

Important! If the appliance is installed

under, for example, a hanging cabinet, a

clearance of at least 10 cm between the

top of the appliance and the cabinet

above it must be maintained.

Please check whether, after installing

your appliance and especially after

reversing the door, the door seal fits

tightly. A badly fitting door seal may lead to heavy frosting and a

higher power consumption (see also "Something not working").

Remove the two wall spacers from

the appliance accessories pack and,

in accordance with the illustrations,

insert them into the retainers located

at the top of the rear of the appli-

ance so that the distance from the

wall required for the necessary venti-

lation is ensured.

1. The appliance must be level. Please compensate for unevenness in the

floor by turning the two adjustable feet at the front.

When two appliances are placed beside each other, the spacers

enclosed in the plastic wrapping should be glued between the appli-

ances as shown in the illustration.

818 36 10-01/6

Installation

109