A-Neuvideo HD-44G Instruction Manual - Page 3
Browse online or download pdf Instruction Manual for Switch A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 pages. Ethernet (tcp) set up
Also for A-Neuvideo HD-44G: Instruction Manual (20 pages), Instruction Manual (6 pages)
Print Page
A
NEUVIDEO
CONTENTS
INTRODUCTION & PACKAGE CONTENTS ...............................1
FEATURES & SPECIFICATIONS .................................................2
FRONT PANEL .............................................................................3
REAR PANEL ................................................................................6
TYPICAL APPLICATION ...............................................................7
REMOTE CONTROL ...................................................................9
IR ExTENDER ............................................................................ 11
EDID FUNCTION ........................................................................13
ETHERNET & RS-232 SERIAL INTERFACE ................................16
INTRODUCTION
The HD-44G is professional 4x4 matrix routing switch. Supporting
(4) HDMI Inputs. Output supported (4) HDMI. The HD-44G is
based on the HDMI standard and supports full resolution HDMI
Video with embedded EDID. With a signal bandwidth of 340Mhz,
there is no signal degradation. High Definition Digital signals can
be selected and distributed from any (4) Inputs to any (4) Outputs
in any combination. The Switcher is certified as being fully CEC
and HDCP 2.0 compliant, full HD HDMI V1.4a 3D formats, data
rates up to 6.75 Gbps. Supports UxGA/WUxGA/DVI 1920x1200
resolution to any HD displays. The Switcher is certified as being
fully HDMI and HDCP compliant, with RoHS, CE, FCC certification.
Support high resolution HDMI sources routed to HDMI displays,
monitors, projector or audio receivers. The EDID management can
be selected between (7) different modes. Control is provided via
Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-
browser). An RS-232 Windows GUI interface is provided for matrix
routing control (Windows only).
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
• Main switch console unit
• RS-232 V2.0 Protocol Instructions
• Ethernet V2.0 Protocol Instructions
• Master wireless IR Remote Control (SW-HD44)
• 19 inch Ear mount bracket (Part # 1U-440L)
• IR Rx-100 IR Receiver Extender distance ~ 984ft (300M)
Receiver set
• CD Contents : Windows GUI, ISP V1.0 Windows driver
• RS-232 Cable 6 ft (2M)
• ISO Screws
• Operating Instructions
• Worldwide Universal Power Supply: DC12V, 5A, (Worldwide
Universal 100~240 VAC, AC 50/60Hz.)
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise - without the express written permission and consent.
© Copyright 2015. All Rights Reserved.
Version 2.0 JUNE 2015
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
1