AEG SANTO C 7 14 40 i Operating And Installation Instructions - Page 8

Browse online or download pdf Operating And Installation Instructions for Freezer AEG SANTO C 7 14 40 i. AEG SANTO C 7 14 40 i 14 pages. Integrating fridge freezer
Also for AEG SANTO C 7 14 40 i: Operating And Installation Instructions (29 pages)

AEG SANTO C 7 14 40 i Operating And Installation Instructions

Interior Accessories

Storage Shelves

The glass shelf above the fruit and
vegetable
compartment
always remain in position, to ensure
fruit and vegetables stay fresh longer.
The remaining storage shelves can be
adjusted to various heights:
Pull the storage shelf forward until it
can be tipped up or down and remo-
ved.
To insert at a different height use the same procedure in reverse.
Adjustment for tall goods:
Remove the front half of the two-part vario glass storage shelf and insert it
at a different level. Space is thus gained for storage of tall goods on the
underlying storage shelf.

Variable Inner Door

The door compartments can be pulled up and removed, and inserted at
other positions as needed.

Fresh food refrigeration

To obtain the best performance:
• do not store warm food or evaporating liquid in the refrigeator
• do cover or wrap the food, particularly if it has a strong flavour.
• Position food so that air can circuiate freely round it.
Useful hints:
Meat (all types): wrap in polythene bags and place on the glass shelf above
the vegetable drawer(s)
For safety, store in this way only one or two days at the most.
Cooked foods, cold dishes, etc: these should be covered and may be placed
on any shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the
special drawer(s) provided.
Butter and cheese: these should be placed in special airtight containers or
8
should
D338
Instructions for building-in
Apply joint the sealing strip as shown
in figure.
Push appliance into the housing
until stop strip (A) touches the
kitchen unit.
Open the door and push the appliance
against the side of the kitchen unit op-
posite to that of appliance hinges.
Fasten the appliance with 4 screws
provided in the kit included with the
appliance. Snap ventilation grille (C)
and hinge cover (D) into position.
D765
A
D023
D
C
D723
21