AEG 115 D Installation And Operating Instructions Manual - Page 5
Browse online or download pdf Installation And Operating Instructions Manual for Ventilation Hood AEG 115 D. AEG 115 D 17 pages. Electrolux operating instructions extractor hood 115 d
Print Page
Electrical connections
Voltage and
Please ensure that the voltage and current indicated on the rating
current
plate agree with the voltage of your electricity supply.
If your appliance has been equipped with a mains lead with a
moulded-on type plug, you must comply with the following
regulations:
The plug moulded on to the lead incorporates a fuse. For
replacement, use a 5 amp BS1362 fuse. Only ASTA approved or
certified fuses should be used. If the fuse cover/carrier is lost, a
replacement cover/carried must be obtained from an electrical
goods retailer. If the socket outlets in your home are not suitable
for the plug fitted to the appliance, then the plug must be cut off
and destroyed for safety reasons, and an appropriate plug fitted.
When wiring the plug ensure that all strands of wire are securely
Important
retained in each terminal. Do not forget to tighten the mains lead
clamp on the plug.
This unit is screened against radio interference in compliance
with European Community directives 87/308 EEC, EN 55014/
DIN VDE 0875 Part 1.
Electrical connections
230 V - using fixed power supply line with plug.
240 V - using fixed power supply line (Great Britain).
Fuse rating
13 amps
(The unit should only be connected up by an authorized electrician).
See rating plate for further information.
It is recommended that the socket for the plug is sited above the
cooker hood or above the overhead cabinet.
This has 2 advantages:
1) The socket is not visible.
2) The appliance can easily be unplugged when necessary.
If a fixed connection is required the cooker hood should be
connected by an electrical installer registered with a competent
electricity company. An isolating device is to be provided on the
fixed wiring side. Switches with a contact opening of more than
3mm apply as isolating devices.
These include-automatic cut-out switches, fuses and contactors
(VDE 0730, s. 7, Part1).
5