AEG 2600 D Operating And Installation Instructions - Page 6
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood AEG 2600 D. AEG 2600 D 20 pages.
Also for AEG 2600 D: Operating And Installation Manual (16 pages)
Print Page
Description of the Appliance
Extractor version
• The hood is supplied as an
extractor unit and can also be
used with a filtering function
by fitting one charcoal filter
(special accessory).
• You will need original AEG
charcoal filter for this function
(see Special Accessories).
• The air is discharged to the
outside through a pipe, which
must be fitted to connection
flange A. Fig. 1.
• In order to obtain the best performance the hose should have a
diameter equal to the outlet hole.
Should there already be a pipe of diameter 125 mm that ducts to the
outside through the walls or roof, it is possible to use the 150/125
mm reduction flange provided. In this case the hood will be slightly
noisier.
Filter Version
• The air is filtered through a charcoal filter and returned to the kitchen
through the top grill of the outlet pipe.
• You will need an original AEG KF8 charcoal filter for the filtering
function. (See Special Accessories).
• Fix the deflector using 2 screws. Fig. 2.
• Optionally, the position of the chimney elements can be changed.
When using the hood in the filter version the chimney must be fixed
at the top, with the air outlet grill at the side.
Fig. 2
6
A
Fig. 1