AEG 8000 Series User Manual - Page 22

Browse online or download pdf User Manual for Ventilation Hood AEG 8000 Series. AEG 8000 Series 32 pages.

Print Page

Clean all accessories after each use and let them dry. Use only a microfibre cloth with warm

water and a mild detergent. Do not clean the accessories in a dishwasher.

Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.

Accessories

11.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.

Step 1

Turn off the oven and wait until it is

cold.

Step 2

Loosen the screw. Pull the front of the

shelf support away from the side wall.

Step 3

Pull the rear end of the shelf support

away from the side wall and remove

it.

Step 4

Install the shelf supports in the oppo‐

site sequence.

The retaining pins on the telescopic

runners must point to the front.

11.3 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.

WARNING!

There is a risk of burns.

Turn off the oven and wait until

it is cold.

Step 1

Turn on the oven.

Option

Pyrolytic cleaning, quick

ENGLISH

Before the Pyrolytic Cleaning:

Remove all accessories except for

shelf supports and telescopic run‐

ners.

Step 2

Press:

/ Cleaning.

Cleaning mode

Light cleaning

CAUTION!

If there are other appliances installed in

the same cabinet, do not use them at the

same time as this function. It can cause

damage to the oven.

Clean the oven floor and the inner door

glass with warm water, a soft cloth and

Select the cleaning mode.

a mild detergent.

Step 3

Duration

1 h